Menú
Enphase IQ Battery 10T (ENCHARGE-10T-1P-INT)
Battery 10,5kWh
Nro. de artículo
5201900004
Profundidad [mm]
188
Ancho [mm]
1283
Alto [mm]
775
Peso [kg]
143,6
capacidad energética [kWh]
10,5
Profundidad máx. de descarga por [%]
100
Tipo de batería
Litio
Tensión nominal [V]
67,2
Descripción
The Encharge 10T is the 10,5kWh battery for the Enphase Microinverter system with which the self-consumption of solar energy can be increased. Due to the included micro-battery inverter system, an easy direct connection to the home grid is possible via an additional Q-relay.
If the demand on capacity and power grows, the battery can be extended anytime by additional Enphase batteries.
- Usable capacity: 10,5kWh
- Nominal output power (permanent): 3,84kVA
- Cell technology: Lithium iron phosphate (LFP)
- Wall mount
- Acc. To UN 38.3, EN 62040.1, VDE AR-N 4105:2018
- IP55 protection class (also suitable for protected setup outdoors)
- Working temperature range of -15C-55C
- Warranty >60% capacity after 15 years or 6000 cycles, please note the warranty conditions of the manufacturer.
If the demand on capacity and power grows, the battery can be extended anytime by additional Enphase batteries.
- Usable capacity: 10,5kWh
- Nominal output power (permanent): 3,84kVA
- Cell technology: Lithium iron phosphate (LFP)
- Wall mount
- Acc. To UN 38.3, EN 62040.1, VDE AR-N 4105:2018
- IP55 protection class (also suitable for protected setup outdoors)
- Working temperature range of -15C-55C
- Warranty >60% capacity after 15 years or 6000 cycles, please note the warranty conditions of the manufacturer.
- Released for Germany, Austria, Switzerland, Belgium, France, Spain and Portugal
For the Zigbee Communication with the Envoy Gateway, the Enphase Comms-Kit (3403000029) is needed in addition (once per system, no matter how many batteries are included in the system)
Please note that for the installation of the Encharge a certification of the installer is necessary via the Enphase University.
The following link can be used for this certification: https://university.enphaseenergy.com
For the Zigbee Communication with the Envoy Gateway, the Enphase Comms-Kit (3403000029) is needed in addition (once per system, no matter how many batteries are included in the system)
Please note that for the installation of the Encharge a certification of the installer is necessary via the Enphase University.
The following link can be used for this certification: https://university.enphaseenergy.com
Descargas