Menú
Enphase IQ7A-M
Microinversor monofásico/trifásico 349VA
Nro. de artículo
3004000007
Profundidad [mm]
30
Ancho [mm]
212
Alto [mm]
175
Peso [kg]
1,08
Tipo de conexión CC
MC4
Tensión máx. de entrada CC [V]
58
Potencia nominal CA [VA]
349
Potencia nominal CC [W]
366
Rendimiento máx. () [%]
97,17
número de fases de entrada a la red
1
Rastreadores MPP
1
Clase de protección IP
67
Descripción
The Enphase system is new way of inverter system which allows building up systems in almost any size by using only few different basic components.
The IQ7 series devices are actually the inverters of the Enphase system and are located at the PV modules.
The new M-Series now have integrated MC4 connectors, a separate assembly of the adapter is no longer necessary.
Features of the IQ7A:
- Suitable for 60 cell, 66 cell or 72 cell PV modules (also half-cut and bifacial)
- Easy Plug & Play connection
- Module power range 235-460+ W
- MC4 module connectors
- Max output power 366VA
- 25 years warranty, ensured by more than 1 million hours of testing at Enphase
- Powerline-communication
- Euro-efficiency 96,5%
- Degree of protection IP67
- H x W x D 212/175/30,2 mm (without bracket)
- VDE AR-N-4105:2018-11
Recommended module power: bigger than 400Wp
Please also refer to the Module compatibility calculator from Enphase (for selecting the right inverter module, please also refer to the direct link in the header)
https://enphase.com/en-us/support/module-compatibility
The fixation on the mounting system is done by a screw fitting (IBC Topfix and Aerofix, please have a look on the accessories section) or with a module frame clamp.
The AC connection between the inverters is done via the Q-cable.
For operation of the system, an Envoy-Gateway is needed. For countries where a mechanical grid and plant protection is needed (currently most countries in the EU), an additional Q-Relay is also necessary.
Please note the country specific regulations for warranty and service of the manufacturer.
The IQ7 series devices are actually the inverters of the Enphase system and are located at the PV modules.
The new M-Series now have integrated MC4 connectors, a separate assembly of the adapter is no longer necessary.
Features of the IQ7A:
- Suitable for 60 cell, 66 cell or 72 cell PV modules (also half-cut and bifacial)
- Easy Plug & Play connection
- Module power range 235-460+ W
- MC4 module connectors
- Max output power 366VA
- 25 years warranty, ensured by more than 1 million hours of testing at Enphase
- Powerline-communication
- Euro-efficiency 96,5%
- Degree of protection IP67
- H x W x D 212/175/30,2 mm (without bracket)
- VDE AR-N-4105:2018-11
Recommended module power: bigger than 400Wp
Please also refer to the Module compatibility calculator from Enphase (for selecting the right inverter module, please also refer to the direct link in the header)
https://enphase.com/en-us/support/module-compatibility
The fixation on the mounting system is done by a screw fitting (IBC Topfix and Aerofix, please have a look on the accessories section) or with a module frame clamp.
The AC connection between the inverters is done via the Q-cable.
For operation of the system, an Envoy-Gateway is needed. For countries where a mechanical grid and plant protection is needed (currently most countries in the EU), an additional Q-Relay is also necessary.
Please note the country specific regulations for warranty and service of the manufacturer.
Descargas
Accesorios
